CFE guide · Estimating
Import an RFMS Measure Takeoff Into Your Estimate
Save the takeoff report from RFMS Measure as a PDF and open it in Import Takeoff. CFE BidWise reads each line, with the gross quantity, net area and waste %, checks it against your Import Rules, and adds sub-lines such as grout from your rules. Untick what should stay out, then Transfer to Estimate Quote. Nothing is priced: you add the labor and material prices.


Why import instead of retype?
Retyping a takeoff is where the expensive mistakes happen: a 1 in place of a 7, a room left off, square feet typed where the grid wanted square yards. On a big job it also costs an hour of the estimator’s day.
Import Takeoff reads the takeoff report you already save from RFMS Measure, checks every line before it goes in, and fills the Estimate Quote with the quantities, units and notes, so you can go straight to pricing.
The four steps
- Open the takeoffImport from Other Software › RFMS Measure.
- Check the linesType, quantity, waste and location, line by line.
- Fix or leave outRight-click to edit; untick to leave out.
- TransferInto a new or existing estimate, any sheet.
1Open the RFMS Measure takeoff report

In RFMS Measure, save the takeoff report as a PDF. In CFE BidWise, click Import from Other Software on the dashboard and pick RFMS Measure, then Open a takeoff PDF, or drop the file on the page.
The PDF is read on this computer and is not uploaded anywhere. The app tells by itself which program the report came from.
2Check each line in the preview

The Import preview lists every line with its Code, the Type your Import Rules gave it, the description, the Qty and Units. The Checks column shows the waste in the quantity and the net, such as Waste 12% in Qty, net 2,214.36 sf on the LVT.
Lines with no code, like the two transitions, are typed by the words in their description. Your rules add a Grout sub-line under the tile; marked TBD to qualify because grout is not listed on the takeoff, it is one to check before you bid.
Read the yellow Checks before you transfer. A TBD sub-line is the takeoff telling you something is missing, and it is cheaper to ask now than after the bid.
3Fix a line or leave it out

Click a description, quantity or units to type over it. Right-click a line to copy it, insert a row, delete it or add a sub-line. Untick the Import box on a line to leave it out.
Below, Project Notes collects the takeoff name and date and goes into the estimate’s notes. Not imported lists what was skipped, such as the page footers and the customer acceptance and approval block, so you know nothing was lost.
4Transfer to the Estimate Quote


Click Transfer to Estimate Quote. Choose A new estimate quote, or An existing estimate for a change order or alternate on a bid you already have, and which sheet: the Estimate Quote, an alternate or a change order.
The lines are added after the last used row, so nothing on the sheet is replaced. A green bar says what was transferred, with Undo transfer. Nothing is priced: labor, material price and attic % stay blank for you.
Worked example: Lakeview Community Clinic
The RFMS Measure report for Lakeview Community Clinic had 9 lines. After the Import Rules:
| Code | Type | Qty | Check |
|---|---|---|---|
| CPT-01 | Carpet | 1,960 sy | Waste 6.38%, net 1,842.5 sy |
| LVT-01 | LVT / plank | 2,480 sf | Waste 12%, net 2,214.36 sf |
| SV-01 | Sheet vinyl | 1,240 sf | Waste 12.2%, net 1,105.2 sf |
| PT-01 + Grout | Tile | 688 sf + 688 sf | Grout TBD to qualify |
| RT-01 | Rubber / tactile | 452 sf | Waste 12.41% |
| RB-01, WDB-01 | Base | 2,961 lf, 311 lf | Typed by code |
| Two transitions | Transition / trim | 49 lf, 23 lf | Typed by the word transition |
9 lines and 1 sub-line went into JR-260113 in one click, with the grout flagged to qualify.
What to do next
Importing from another program? See the Measure Square 8 import guide, the Callidus import guide and the Excel or CSV import guide.
Import your next RFMS Measure takeoff
Import Takeoff is part of CFE BidWise. Start with the 30-day free trial, no credit card.
Frequently Asked Questions
Which RFMS report do I use?
The takeoff report from RFMS Measure, saved as a PDF. CFE BidWise reads its gross quantity, net area and waste %.
Is my takeoff uploaded anywhere?
No. The PDF is read on your computer and stays there.
Does the import price the lines?
No. Quantities, units, descriptions and notes come in; labor, material price and attic % stay blank for you to price.
Can I import into a change order?
Yes. Choose An existing estimate and pick the change order or alternate sheet, or add a new change order.
Last updated:
